-
Archives
- November 2021
- May 2015
- January 2015
- December 2014
- November 2014
- October 2014
- September 2014
- August 2014
- July 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- December 2013
- November 2013
- June 2013
- February 2013
- December 2012
- June 2012
- April 2012
- January 2012
- October 2011
- August 2011
- July 2011
- March 2011
- February 2011
- January 2011
- November 2010
- September 2010
- August 2010
- July 2010
- June 2010
- May 2010
- January 2010
-
Meta
Tag Archives: DMX
RGB Floods Revisited
A good 5 years ago I came up with my RGB PortaFloods. I have decided it is time to revisit the RGB Flood for Christmas 2013. Parts in use so far: 10W RGB High Power LED Panel 10 Watt Lamp … Continue reading
Posted in DMX, LED Flood lites, Light Controllers
Tagged ATMega, AVR, DMX, LEDs
Comments Off on RGB Floods Revisited
Falling Icicles
Falling Icicles made their debut in my area 2009. Initially they were hideously expensive and hard to find. But secretly I always knew I would get some. Then least year Big-W / K Mart started sell small falling Icicles sets … Continue reading
DMX Load
A fair number of controllers have DMX loads built in. I don’t use them. I am always worried id leave a load jumpered when I extend the DMX line further out. Either way you need to get to remember to … Continue reading
DMX Dongles
I have used two DMX Dongles for my Christmas lights: Enttec Open USB widget RPMs USB DMX Pro The Enttec Open work great but was subject to a fair amount of abuse and kept blowing the RS-485 driver chip. RPM … Continue reading
Controller Design – 48ch DMX DC controller
I just love it when things all come together! My mega tree will consist of 16 Red, Green and Blue LEDs Strings 4 meters long. They were purchased towards the end of last years season from Big -W. Members on … Continue reading
Posted in Light Controllers
Tagged Chistmas Lights, DMX, LEDs
Comments Off on Controller Design – 48ch DMX DC controller
DMX Mega Break out PCB
Why Bother? When prototyping new DMX controllers a lot of the time is spent wiring up similar connections all the time, like the USART for RS-485 driver and an ISP connector, to program the uC. This is where my DMX … Continue reading