-
Archives
- November 2021
- May 2015
- January 2015
- December 2014
- November 2014
- October 2014
- September 2014
- August 2014
- July 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- December 2013
- November 2013
- June 2013
- February 2013
- December 2012
- June 2012
- April 2012
- January 2012
- October 2011
- August 2011
- July 2011
- March 2011
- February 2011
- January 2011
- November 2010
- September 2010
- August 2010
- July 2010
- June 2010
- May 2010
- January 2010
-
Meta
Category Archives: Light Controllers
8 ch dc dmx
Finally got time on these 8 Channel DC DMX controllers Capable of 2 Amps per channel, they Rock. The input voltage is rated at 30v but at a pinch they will operate on 36Vdc. if this is a problem, I … Continue reading
Posted in DMX, Light Controllers
Comments Off on 8 ch dc dmx
RGB Floods Revisited
A good 5 years ago I came up with my RGB PortaFloods. I have decided it is time to revisit the RGB Flood for Christmas 2013. Parts in use so far: 10W RGB High Power LED Panel 10 Watt Lamp … Continue reading
Posted in DMX, LED Flood lites, Light Controllers
Tagged ATMega, AVR, DMX, LEDs
Comments Off on RGB Floods Revisited
Hacking a Grinch Dimmer
I needed a Grinch dimmer fast and I wasn’t able to buy a PCB from RPM in a hurry, so I hacked one. So this is how I made it: next the Bottom – it isn’t as complicated or hard … Continue reading
Posted in AVRs, DMX, Light Controllers
Comments Off on Hacking a Grinch Dimmer
DMX Start Address
All my controllers and most other DMX controllers used in the Christmas Lights hobby don’t use switches to set the start address like most commercial applications. As far as I can see, there are two main reasons for this: Our … Continue reading
Posted in AVRs, DMX, Light Controllers, TOT - tools of the trade
Comments Off on DMX Start Address
Single RGB strip controller
In order to replace the house outline with RGB strips, I need the ability to control individual strips. I still have way too many RGB Kittys made up so I decided to create a new shield for the kitty to … Continue reading
Posted in AVRs, DMX, Light Controllers
Comments Off on Single RGB strip controller
DC Power Distribution
With a lot of decentralized controllers, I need to run both DMX and power to a lot of places. Some times it is convenient to daisy-chain the power, others is is best to run a separate feed from the Power … Continue reading
Posted in Light Controllers, Other Hardware
Comments Off on DC Power Distribution
RGB Kittys
Back in 2007 I stumbled across a house decoration that had fading RGB lanterns high lighting a path to the front porch. John Chapman of Engineering Solutions Inc Developed a suite id LED Based RGB Pixel projects/products. the one that … Continue reading
Posted in AVRs, DMX, Light Controllers
Comments Off on RGB Kittys
Falling Icicles
Falling Icicles made their debut in my area 2009. Initially they were hideously expensive and hard to find. But secretly I always knew I would get some. Then least year Big-W / K Mart started sell small falling Icicles sets … Continue reading
8 Channel RGB LED Flexible Strip Controller
My leaping arches were a disaster this year. originally constructed by cutting 36″ lengths of white rope light that was bent back on itself, to form a 18 section, about 8 of the 32 sections failed to turn on! So … Continue reading
Posted in AVRs, DMX, Light Controllers
Comments Off on 8 Channel RGB LED Flexible Strip Controller
4Channel Dmx DC Controller
I have a couple of RPM’s 4ch AC DMX SSRs. They are a great concept for when you need a small channel count in a remote part of your display. I predominantly use LEDs for displays. This means DC is … Continue reading
Posted in AVRs, DMX, Light Controllers
Comments Off on 4Channel Dmx DC Controller